What is Time Delay ?
In security alarm systems ,the control panel will not sound the alarm immediately when the sensors are triggered. There will be short delay to give the homeowner time to enter the password and deactivate the system, If the password is not entered before time delay, the control panel will activate the alarms.
Time Delay varies in each type of alarm systems, the Time delay settings in ATSS Burglar Alarm systems are as mentioned in below picture.
Active 108 is a 2 Zone key based Burglar/ Intruder alarm system which provides Comprehensive and flexible protection for domestic or commercial premises. Active 108 has 2 Modes of operations.
• Day Mode
• Night Mode
Activating the System in Day Mode
• Keep the Key in OFF position
• Keep the switch in Day Mode
• Activate the system by changing it to ON Position,
Now the system will be activated in day Mode.System-ON LED will Start Glowing (Green). In day Mode ,the zones(1,2) will be in de-active state, Panic & tamper zone will be active.
Activating the system in Night Mode
• Change the Key to OFF position
• Change the Switch to Night Mode
• Activate the system by changing Key to ON Position.
Now the system will be activated in Night Mode.In Night mode both Zones(1,2) Will be activated, Zone 1 takes delay time of 30/60 seconds to activate,Until then Zone 1 LED will be blinking in red color after delay time it will start glowing , zone 2 will be activated immediately(Zone 2 LED will glow in red color). Panic zone will be de-active in night mode.
Deactivating the system
To deactivate the Active 108 Burglar Alarm system Change the Key to OFF Position.Once Deactivated the System ON LED will stop Glowing.
Specifications of Active 108 Burglar Alarm System
Atom is an Single input GSM Communicator, If you are in search of a device which can update your Door open/Close status via SMS this device is the perfect choice for you.
How it’s Works?
Atom is a Single Trigger GSM Communicator, which needs an SIM card and Power Supply 6-12v.The Programming of the Atom can be done through SMS Commands or Android App.
Programming includes
1.Registering as Admin
2.Store 4 User & 1 Admin number
3.Set Alert Condition – Door open/close or both
4.Set Alert Type – Call/SMS or both
Connecting Magnetic Sensor to Atom
Connect an Magnetic Sensor to the Device input as show in the picture, the sensor must be placed in door-To know how to place sensor in door – check here :How to Connect Magnetic Sensor to Door ?
Once the wiring of sensor is finished, Switch on The Atom and activate it. Now according to what you have programmed you will get alerts. Example : If you have set Open alert, You would get alerts when the Door Opens.
Where else can be Active Atom GSM Communicator used ?
It can be used with any devices which provides no/nc voltage free alarm signal to trigger the Atom device.
Active Atom is an Single trigger GSM Communicator, when its gets triggered it sends SMS and Call alert to stored numbers, The device can be programmed through SMS commands or through Android App. The App works on SMS Based only. (Sends and receives SMS through App).
Register Password For the App.
First Register an password and security hint for the app.This helps you to keep your app protected from other.Only who knows the password can sign in.
Once you have registered the password enter in to APP by entering the password.
Add New Device
Click on Add new device.
Device Register
Enter Board Name: Example “Atom Door “
Enter Atom Device Number: Here enter the Number of the SIM card inserted in Atom device
Atom Device Balance Code: Here enter the balance command of the network provider (SIM inserted in Atom device)
Then Click SAVE. Now the phone Number from which you are using the app will be registered as admin.(Note : In dual SIM mobile, the APP sends SMS from SIM 1 only)
Now Click Your Board Name which appears on Screen – Atom Door
Set Alert Condition
You can set Open Alert, Close Alert or Both Alert by clicking on Door Graphic Icon.
Store User Numbers
Store User Phone Numbers by clicking on the Group Icon,Once You enter an Phone number click save and wait for few seconds before entering next number. As the App works on SMS based it takes time to send and receive SMS.
Set Alert type
You can set call alert or SMS alert by clicking Alert Icon,You can On and OFF – call & SMS alert as per your wish.You can also edit the SMS Alert message here.
Check Balance & View Logs
By clicking Balance Icon you can check the balance of the SIM in Atom.
Click at Top Right corner of App to check : Device Log,Change users,Exit App.
Note : For every Click on the respective Graphic Icons the App Sends an SMS.Make sure you have an Working SMS Plan activated on your number.